Résumé
Profile
My name is Rick Mur and I’m 24 years old, despite the fact of my relatively young age I have several years of experience with computers, networking and a little bit of software development. I am very tenacious and autodidact technical consultant / architect for Cisco and Juniper data-center and service provider networks. I am able to keep total overview of entire solution, while still able to dig deep into specific technological challenges.
5+ years experience in high-end service provider and datacenter networks.
Information
Name: Richard Sebastiaan (Rick) Mur
Birthdate: July 17th, 1987
Place of birth: Utrecht, The Netherlands
Nationality: Dutch
Marital status: Relationship
Drivers license: Yes
Certifications
CCIE #21946 Routing & Switching
CCIE #21946 Service Provider
CCIE #21946 Storage Networking
JNCIE-SP #851
JNCIP-SP
JNCIS-SP
JNCIA-Junos
JNCIE-M #851
JNCIP-M #1352
JNCIS-M
CCNA
CCNP
CCIP
Cisco Datacenter Networking Support Specialist
Cisco Datacenter Storage Support Specialist
Cisco Routing & Switching Field Specialist
Cisco Data Center Unified Fabric Support Specialist
Cisco Data Center Support for Unified Computing Specialist
Cisco Unified Computing Technology Support Specialist
Cisco Unified Fabric Technology Support Specialist
EMC VCE Vblock Series 700 – Deployment, and Management Cloud Specialist
EMC VCE Vblock Series 300 – Deployment, and Management Cloud Specialist
JNCIA-ER
JNCIA-EX
MCSA
MCSA:messaging
MCSE 2003
Education
HAVO (HGSE) Niftarlake College, Maarssen 1999-2005 Graduated: Yes
Experience
Technical Consultant, Telindus-ISIT, Utrecht
March 2009 – present
Architecture, High/Low-level design, write and defend RFx proposals, POC testing, implementations, migrations and last line troubleshooting on Cisco and Juniper networks at ISP customers. Team leader of the SP engineering team and speaker at technical sessions. Started as Support Engineer and got promoted to Technical Consultant in 2011.
Responsibilities:
- Defining architecture and design for Service Provider customers and managed services.
- Design Authority.
- Lead engineer on some of the largest networking projects in Europe
- Public speaker at worldwide networking events.
- RFI/ RFP answering and presentations.
- 3rd and 4th line troubleshooting for high-end customers.
- Practice leader Service Provider
- Coaching internal employees
- Training both employees and customers
Main focus on Cisco and Juniper internetworks at SP and Datacenter customers
Projects:
- LTE/3G design and deployment – Large Internet Service Provider
- Consultancy in architecture
- Low Level Design of new 3G/LTE mobile network
- Proof of Concept for IP VPN with MPLS FastReroute and NAT/SFW with MS-DPC on MX960.
- Assist in deployment in production network
- Responsibilities: lead consultant and troubleshooting
- MX BRAS design and implementation – Large Internet Service Provider
- • HLD and LLD of new Juniper MX480 with MPC2-EQ cards for BRAS (subscriber) deployment
- Proof of Concept for subscriber management on MX and H-QoS configurations for quad-play offering on Trio based EQ cards
- Train customer employees on Juniper MX
- Deployment in production network
- Responsibilities: lead consultant
- Network Architecture Assessment – Large European Mobile Network Operator
- Conduct several interviews and collect information regarding the current IP network
- Write and defend assessment document with IP network director and present findings to senior and CxO level management
- Responsibilities: lead consultant
- Architecture/Design, Implementations and Advanced Support – Large European Mobile Network Operator
- Support on MPLS/IP core consisting of Cisco 12000 P routers and Cisco 7600 PE routers
- Define architecture, high- and low-level design and implementation of new IP core consisting of Juniper MX960 P routers and Juniper MX80 route reflectors
- Define and execute migration steps to ensure a cost effective and smooth migration path from Cisco based MPLS-TE/RSVP (auto-tunnel-mesh) to Juniper MX960 based MPLS-LDP network.
- Responsibilities: pre-sales, lead engineer and last line of troubleshooting
- Advanced Support – Education/Research Internet Service Provider
- Support on IP core consisting of Juniper T640 and T1600 routers
- Implement 100GE on Juniper T1600 routers within a lab environment
- Deployment and troubleshooting
- Contact with end customers, private/public peering and transit providers
- Responsibilities: pre-sales, lead engineer and last line of troubleshooting
- Architecture/Design and Advanced Support – Large Internet Service Provider
- Support on IP core consisting of a Juniper TX4-T640 matrix and Juniper MX960 edge routers
- Write low-level design and lead implementation of new Juniper T4000 core
- Define architecture and high-level design of new IP core consisting of Juniper T4000 core and Juniper MX960 with 100GE interfaces. Define detailed migration steps to ensure a cost effective and smooth migration path from T640-TX4 to T4000-TX2 and 100GE interfaces.
- Responsibilities: pre-sales, lead engineer and last line of troubleshooting
- IPv6 – Large Internet Service Provider all over Europe
- Assist in IPv6 design and rollout plan
- Co-develop and teach deep IPv6 networking course with theory and loads of hands-on labs on both Juniper and Cisco hardware
- Build lab consisting of 10 virtual Cisco pods and 7 Juniper pods based on logical-systems and logical-tunnel connections based on the MX480
- Responsibilities: lead engineer and instructor
- Route Reflector Replacement – Large Internet Service Provider all over Europe
- Replaced 28 international route reflectors
- Communication with engineers all over the world instructing smart-hands in datacenters
- Current platform: Juniper M7i, New platform: Juniper JCS1200
- Responsibilities: pre-sales, lead engineer and part of project management
- Core Collapse and Expansion – Large Internet Service Provider all over Europe
- Implementing Cisco CRS-1 routers in the network core in Amsterdam and London
- Migration of multiple international SDH lines to 10GE, involving communicating with several parties in a short time frame during the night
- Implement Juniper MX960 with new 3D linecards
- Migrate Cisco Catalyst 6500 coreswitches to Cisco CRS-1 and MX960 core
- Implement IS-IS, BGP and MPLS VPN’s on the new devices
- Communication in English
- New Network Architecture – Large Internet Service Provider all over Europe
- Implementing a new Network Architecture as per low-level design
- Creating configuration and implementing changes during change windows at night
- Network stretches over several countries.
- All communication in English
- All high-end platforms, Cisco 12k, Cisco CRS-1, Cisco 6500, Cisco 7500, Juniper MX960, Juniper M320, Juniper T320, Juniper M7i
- IBGP migration from Confederation set-up to Route Reflector set-up
- IGP migration from OSPF to IS-IS
- Enabling MPLS and LDP
- Configuring QoS
- Advanced Support – Large Mobile Network Operator in the Netherlands
- Monthly whiteboard meetings, presenting new technologies or presenting result of research
- Advanced Support for IOS and IOS-XR related questions
- Network based on Cisco CRS-3, ASR9000, XR12000 and 7600 platforms
- Highly advanced MPLS and VRF-Lite design with multiple layers
- Several Cisco UCS implementations – Internet Application Hosting Companies and Large Law/Legal Companies
- Implement Cisco UCS bladeservers using SAN boot for stateless design
- Implement dual-fabric Fibre Channel network based on Cisco MDS switches
- Implement and migrate to new switchcore based on Nexus 5000′s on 2 locations with dark fibers
- Implement VMware ESX 4.0 connecting to NetApp shared storage based on NFS
- Disaster Recovery Datacenter – Large Enterprise
- Large data consolidation and WAN optimalization project over 40+ sites in Europe
- NetApp Storage (implemented by storage department: ISIT)
- WAN Optimalization with Cisco WAAS
- Troubleshooting project about disconnected drive shares involving Microsoft, NetApp and Cisco
- Defining a new WAN/LAN architecture and design
- Joined customer in travel to the worldwide headquarters in the US to defend and approving new designs
- Assist in Asian/Pacific project design
- Migrated entire current datacenter to a resilient dual-active datacenter with split WAN stacks consisting of Cisco 7200s, dual-active WAAS cluster with WCCP and GRE Return.
- Installed Cisco 3750E access and core switches with 10GE layer 3 and layer 2 links
- LAN refresh – School
- Installation of over 40+ Juniper EX4200 switches
- Configuration of all Virtual Chassis (switch stacks)
- Migrating old coreswitch Cat 6000 to new 5-high Juniper EX4200 switchstack
- Installation and partial configuration of Juniper SRX650 as firewall and DMZ
- Configuration of native IPv6 internet connection and enabling IPv6 routing on all VLAN’s
- LAN and VSS implementation and troubleshooting – Bank and Government
- Architecture and Design for new Cisco VSS based core network
- Assisting with implementation and migration of new Core network
- Multiple troubleshooting sessions on DMZ and Core network
- Assisted in new Spanning-Tree design
Network Engineer, Legian Professionals, Den Haag
June 2007 – February 2009
Secondment positions at the following clients:
-
- KPN Mobile CARE Change, Senior Change Implementer
- Research, creating low-level design and implementation physically and remote of various changes in the production network that consists of approximately 350 Cisco routers, 500 Cisco switches and 300 HP and Sun servers.
- Supporting the design team for building a new backbone and DMZ using VSS, FWSM (firewall) and ACE (load-balancing) module’s in Cisco 6500 switches
- Support in the design and support team of a backbone based on 12 Cisco 7606 routers. Built a new testing platform, created configuration snippets and upgraded software in the production network
- KPN Mobile CARE Change, Senior Change Implementer
-
- KPN Mobile Test & Acceptance, Test Manager
- Built a out-of-band management network based on Cisco, Avocent and HP equipment in 6 data-centers with a total of 70 devices. Work consisted of placing physical devices and configuring
- Developed and gave a training for users of the out-of-band network
- Support, building and configuration of hundreds of management interfaces after the move of the test-center and building and configuring a new test network that consisted of 30 Cisco routers and 20 Cisco switches
- KPN Mobile Test & Acceptance, Test Manager
-
- KPN Mobile Transmission Services, Junior Network Engineer
- Support of the lead designers by testing and changing designs and configurations and testing new features for the network
- KPN Mobile Transmission Services, Junior Network Engineer
Systems Manager, Mur Conditioning, Utrecht
June 2005 – January 2011
Management and expansion of the complete network and self developed applications, the network consists out of 5 Dell servers, 10 workstations and 11 PDA’s. Worked on the following projects:
- Network- and Systems-management (current job)
- Network- and Systems-management at several small companies
- Migration of a single NT4 server to a new hardware platform and installation of a Windows Small Business Server 2003 environment
- Design and development of a temperature registration web-application in C# 2.0
- Support and database management of a migration from a Microsoft Access database to Microsoft SQL server with a Microsoft Access front-end
- Design and development of a generic web platform with C# 2.0 and Crystal Reports for customers and employees to view and print all their relevant data.
- 2010 project was migrating current hardware server environment to a new VMware ESXi with shared NetApp storage accessed over iSCSI, NFS and CIFS/SMB. Environment contains 8 virtual servers based on Windows 2008 R2 x64 with SQL 2008 R2, Exchange 2007 and hosts various web applications
Developer, De Heer Software, Sliedrecht
December 2005 – January 2007
Design, development and maintenance on the following projects:
- Tweaking, optimizing and debugging a VB6 based planning tool
- Design and development of a universal planning tool in VB.NET 2.0
- Changes and development of several PDA applications in VB.NET Compact Framework using XML templates and advanced SQL queries
- Development of supporting web service in C# 2.0 for the universal planning tool
- Design and development of several implementations of the universal planning platform
- Installation and implementation at several clients of all above applications
Properties
Personality
- Enthusiastic en driven
- Motivated and ambitious
- Autodidactic and curious
- Calm
- Team-player and individually strong
Qualities
- Creativity
- Analytical
- Tenacious
- Troubleshooting skills
Languages
- Dutch spoken and written: native
- English spoken and written: very good
- German spoken and written: good
GOD BLESS U
U R HONORED MAN
I WISH TO BE LIKE U
Hi,
Thats really a great achievement at that age.My hearty congratulations and wish you all the best for your future
sreerama
you are great man!
You are really a genius. You have done a lot of work and I wish you all the best.
hi. i sant u many mails but u did not reply me anymore
… anytime i often refer to your site to see if you get another certificate. i am on the way you are. but i’m not allowed to take my exams and then have very limited chance to take good jobs because i’m an Iranian. God blesses u.
I find my self interested in the cisco while am 45th i did ccna and now i am self-studying ccnp on my way to ccie, now i am 49 year old,
my best regards
Cisco Prodigy.I believe you have matured to a level where you can suggest Cisco few changes to the certification needs.
You are just awesome.
You are fanatic about technology,due to which you have been able to crack toughest nut CCIE at the age of 21 and went on to complete tripe CCIE.
Just unbelievable,
Sandy.
Congratulations…. You are one blessed young man!
Im just starting ccna any advice?
great site !
Hi Rick how are you great dear nice job its a very proud to be achivement dear can you tell me the rotten of this achivement i mean how did you do this? because i want to do this as well i am ccna, ccnp, ccai, mcse ,mcts and jncia certified what was your rotten i mean were you read complete books or cbts or any other material please please tell me what is the procedure how should i start?????
thanks with regard adeel shahzad
U R great wall!!
Hoi Rick ik heb je naam uit mijn netwerk. We zijn opzoek voor een grote opdrachtgever in Zuid-Holland naar een SR. Network Engineer (support).
Wil jij werken bij van de bedrijven die zelfstandigheid en zelfontplooiing hoog hebben staan bel ons dan!!
MVG
Ron de Graaff
Associer Werving en Selectie
tel +316 51184163
You are of other world.
Tu é Fodão !!
Hi Rick,
I stumbled across this website in a google search. I am an IT recruiter and always interested in speaking with Cisco engineers!
Are you currently open to a career move?
Kind regards,
Julie Carpenter
JCarpenter@antal.com
Hi Rick
I’m very impressed by your achievements. I’m also planning to go your way. I have completed my CCNA training, will soon be sitting for my exam. I’m from India. Can you please guide me about the future prospects after CCIE, i.e how much one can get paid as a CCIE, I’m planning to go for specialization in either Security or Wireless or may be both. What are the career scopes in these two specialization.
Kind regards
Tanuj
aggarwal.tanuj@yahoo.com
I have a big project for u if interested building an ISP and IP Telephony Network for 200000 customers in a flat area distance 30 KM circle.
More info contact me
U R not a normal man…..
i cant say what u r…..
woooooow! you have got your JNCIE ?!!!! you deserve the bests …..
Wish u a very bright and shining future.
Congrats man !
My career is some how same, let me share with you, Back in 2007 when i end my Graduation, many people told me to go for Master but one of my best teacher Nayyar Ahmad(nayyares.blogspot.com) advice me to go for certification. I start my career of certification in Jan 2008. On 21st Jan 2008 i sit in CCNA class with a wounder full teacher of mine Haroon Malik (Triple CCIE – http://www.corvit.com). Some how i finish that and immediatly start CCNP. In end of today i hold following certification but still many to come specially CCIE-SP this year.
CCNA Certified
CCNA-Security Certified
CCNP Certified
CCIP Certified
MCITP (Windows Server 2008) Certified
JNCIA-EX Certified
JNCIA-ER Certified
JNCIS-ER Certified
JNCIS-SEC Certified
I hold training of the following midules
CCIE (R&S)
CCSP
PMP
MCSE
Currently i am working as Data Communication Enginner for HUAWEI
I really enjoy my way and i look forward for may many more
You are very successful and talented man dude. I like your way.
hii bro
i am a college graduate of 20yrs old preparing for CCNA and want to be a rock star in networking world.Wht’s your guidelines and tips for career in networking and special tips for CCNA?